|Home Page | Forum 968s For Sale | Contact us|
K968 POR - K300 WAX
11-03-04 - I bought the car with 112K miles on the clock, 5th owner.
18-03-04 - Replace dull speedo lights. - Done
02-04-04 - DME relay, rotor arm, distributor cap - Done
03-04-04 - Change the radiator and thermostat - Done
03-04-04 - Replace the belts and the rollers - Done
07-04-04 - Repair cambelt tensioner - Done
24-04-04 - Visually check the camshafts and chain -
by me then Hartech measured the wear all OK.
01-05-04 - Clean engine bay - Work in progress
-04 - Reset hazard warning light on dashboard - Done by NineMeister
-04 - K&N air filter - Done
-04 - Paint wheel hubs - Done
-04 - Refurbish alloys - Done by Finesse Auto Bodies
-04 - M030 anti roll bars - Fitted by Tony Greatorex
15-06-04 - K968 POR number plate added.
02-07-04 - Leda suspension fitted on the front at Leda,
05-08-04 - Rear torsion bars re-indexed and rear Leda
suspension fitted by Hartech.
-04 - Oval repeaters - Done
-04 - Iridium spark plugs - Done
-04 - Promax performance chip - Done
-04 - Leda suspension changed to KW suspension - Done by Hartech
15-12-05 - Original number plate put back on.
4-02-06 - Install Road Angel Compact
4-02-06 - Install Laser
Pro parking sensor
Change number plate to K300 WAX.
M030 Calipers removed and replaced with standard.
KW Variant 3 suspension removed and replaced with standard.
18" Carrera wheels removed and replaced with 17" Cup 2 wheels.
During 2007-2009 the Coupe underwent a significant refurbishment including engine bay and suspension. Here are some of the images taken at the time.
Re-plate fasteners from engine bay and under the car where possible.
Powder coat cam cover and inlet manifold, also parts from brakes etc.
Clean oil cooler and steering fluid cooler pipe.
Refurbish starter motor and pinion shaft bush. Starter
November of 2011 - Full fluids and belts service at Hartech.
Changed coolant take off and gasket(goes from water pump to expansion tank. Due to minor coolant leak.
20-03-2013 - New clutch master cylinder(945 423 149 00(RHD)) and Slave cylinder(944 116 237 02). Due to leaking non return valve in master cylinder and minor weep from slave cylinder.
|Porsche 968 UK | Forum | Shop | Contact us|
|Would you like to have a Porsche related advert
or link on this website
Please complete the contact form.
|(No affiliation with, or approval of, Porsche
AG, Porsche Cars GB or Porsche Club GB is intended or implied.)
There is no Intention to Infringe any Copyrights, Logos or Trademarks. All Copyrights, Logos and Trademarks remain the Property of the Rightful Owners.
Copyright © 2002-2013 porsche968uk.co.uk. All Rights Reserved. No part of this web site or related materials may be reproduced, stored in a retrieval system, transmitted, retransmitted, duplicated, copied, reposted or otherwise used in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the express, prior, written approval of the owners of porsche968uk.co.uk
|Website Design By K300|